Sanders & Spreaders

SALTDOGG

SaltDogg offers a variety of Stainless Steel, Steel and Poly Hopper Spreaders

Available in both Electric and Gas

SHPE2000

Buyers Products SaltDogg SHPE2000 Electric Poly Hopper Spreader gives contractors and facility managers a low-volume hopper spreader ready for residential or commercial use. Electric power means quieter operation with no need for refueling or engine servicing.

The durable 2 cubic yard poly hopper features a patented double-wall construction. It fits a 3/4 ton or 1 ton pickup truck and uses a bulk salt or a 50/50 salt/sand mix.

The spreader features a 2-1/2 in. stainless steel auger and trough with a 200 lb capacity vibrator to keep material flowing. The auger will automatically reverse if it gets jammed to clear the clog and restore flow. It's powered by an independent 1/2 HP, 12V gear motor.

Download Specs

2 Cubic Yard Gas Stainless

Buyers Products SaltDogg 2 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a 50/50 salt/sand mix. Its 8 ft hopper can fit in an extended-bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences.

A SaltDogg stainless spreader is an investment made to last. Its hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper also comes outfitted with a top screen. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.

Download Specs

PRO2500CH

The SaltDogg PRO2500 Electric Poly Hopper Spreader with Conveyor Chain is designed for serious commercial and municipal users*. The spreader fits flatbeds, dump trucks, and large pickups (dual rear wheels with 8 ft beds and a minimum 13,000 lb GVW). It features a patented 2.5 cubic yard double-wall poly hopper that won't rust or dent.

The spreader can handle salt, sand, or a 50/50 salt/sand mix with its 12 in. wide all-steel pintle chain conveyor and stainless steel trough. The conveyor is driven by an independent 3/4 HP, 12V gear motor. A 200 lb vibrator works with the stainless steel inverted V to keep your material flowing. High-flow design allows for consistent material coverage even at high speeds, and the chute can be adjusted to suit different materials. It also swings away to make bulk unloading easy.

Intuitive in-cab controls let you independently manage conveyor and spinner speeds and turn the vibrator on/off with the flick of a switch.The spreader comes standard with a top screen, tie downs, and a fitted tarp.

Download Specs

TGS07

The SaltDogg TGS07 11 Cubic Foot Tailgate Spreader is a large volume commercial tailgate spreader. It features a horizontal auger, stainless steel trough, and an included concealed vibrator that allows it to spread bulk salt or a 50/50 sand/salt mix from 3/4 ton and 1 ton trucks.

The spreader has a low-profile, 11 cubic foot hopper available in black, red and yellow. The hopper's frameless, double-wall poly construction is durable and highly corrosion resistant. The spreader mounts to a 2 in. Class 4 hitch with patented horizontal and vertical adjustment.

Available sizes from 3 cubic feet to 11 cubic feet.

Download Specs

3.5-5 Cubic Yard Spreader

Buyers Products SaltDogg 3.5-5 Cubic Yard Electric Conveyor Chain Spreader gives contractors and municipalities a heavy duty electric spreader ready for commercial use. The 96 in., 108 in., or 120 in. hoppers are designed for dump bodies and flatbeds with a minimum 17,500 or 15,000 lb GVW (gross vehicle weight) chassis (depending on model chosen). It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

The spreader is equipped with a steel pintle chain conveyor that features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 14-1/2 in. wide with 1/4 in. crossbars and a stainless steel floor. An adjustable feedgate with lock pin offers additional material flow control.

The spinner is powered by a 1/2 HP, 12V motor, and the conveyor chain is powered by a 3/4 HP, 12V motor. The spreader's 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing. The spreader is controlled by a heavy duty in-cab controller with independent variable speeds for the conveyor and spinner. It also comes outfitted with four hinged-top screens with 1/4 in. bars.

Download Specs

SHPE4000

Buyers Products SaltDogg SHPE4000 Electric Poly Hopper Spreader gives contractors and property managers a powerful spreader for medium and heavy duty commercial use. The spreader works with dump trucks and flatbeds with a minimum 17,500 GVW (gross vehicle weight). The 4 cubic yard spreader handles bulk salt or a 50/50 salt/sand mix. Its electric-powered design means quieter operation with no need for refueling or engine servicing, giving you more time on the road.

An SHPE series spreader is an investment made to last. The double-wall, lighter weight, all-poly hopper construction won't rust or dent. A simple cleaning makes it look like new. It's supported by a corrosion-resistant stainless steel frame.

The SHPE gets the job done with a 5-1/2 in. steel auger and stainless steel trough. The auger is driven by a 3/4 HP, 12V gear motor. Dual 400 lb vibrators work in conjunction with the inverted V and auger to keep material flowing. A 14 in. polymer spinner, powered by an independent 1/2 HP, 12V motor, can cast a 5-30 ft radius. The SHPE4000 features a chute with an open trough and stainless steel spinner shield. The spinner assembly can be easily removed for cleaning and storage.

Download Specs

SHPE6000

Buyers Products SaltDogg SHPE6000CH Electric Poly Hopper Spreader gives contractors, property managers, and municipalities a powerful 6 cubic yard spreader for commercial and municipal use. The high flow pintle chain conveyor can drive bulk salt or a 50/50 salt/sand mix at a flow rate of 600 lb per minute. The spreader works with dump trucks and flatbeds with a minimum 25,999 GVW (gross vehicle weight). Its electric-powered design means quieter operation with no need for refueling or engine servicing, giving you more time on the road.

The patented double-wall poly hopper is supported by a corrosion-resistant stainless steel frame and includes two steel top screens to help break up clumps of material during bulk loading. It features a 6 in. steel variable pitch auger with a stainless steel trough. An independent 3/4 HP motor powers the auger. The included inverted V and 900 lb vibrator help break up clumps and keep material flowing. A 14 in. polymer spinner, powered by an independent 1/2 HP, 12V motor, spreads material 5 to 30 ft.

The SHPE6000CH features a chute with an open trough and stainless steel spinner shield. The spinner assembly can be easily removed for cleaning and storage. The vibrator and independent conveyor and spinner speeds are controlled by an in-cab controller.

Download Specs

Henke

A century in the making, Henke Manufacturing has evolved to become an industry leader in designing and building a full line of first quality, commercial duty snow management equipment and allied products.

Please see below for our Henke products. For other Henke Manufacturing products please do not hesitate to contact us.

HXC Cartridge Spreader

The replaceable cartridge in our innovative HXC Spreader is not only easier to service and repair, it also allows you to choose between an auger, dual auger, or pintle chain. This gives you the control and versatility you need for your specific materials and spreading applications.

  • Easy maintenance and clean-out with removable cartridge (no need to climb into the hopper)
  • Modular design reduces cost of ownership by providing longer service life of the main structure and hopper (replace a worn out cartridge rather than replacing the whole unit)
  • Adjustable Spinner chutes are available with dumpover and tilt up options
  • Pre-wet and De-icing systems are available
  • Built in hydraulic lockout systems on all auger spreaders
  • Spinners are available in poly or steel versions
  • Hopper vertical extension available for increased capacity
  • Select from several options including top grates, rib mounted rollers, stationary or swing up ladder, bumper guard, front and side spill shields
Download Spec Sheet

HX V-Box Spreader

Henke’s V-Box Spreaders are designed to give you the performance you need. Available in stainless steel or painted mild steel.

  • Remote chain tensioning
  • Wide base rails and conveyor for more consistent spread and minimizing material bridging
  • Fully replaceable conveyor slider bed
  • No tool adjustment spinner deflectors
  • Built-in hydraulic lockout systems
  • Unique telescoping discharge chute for even high flow rates
  • Spinner drive “shed” design prevents clogging & fouling in the chute
  • Integrated safety features allow tool free access for routine maintenance
  • Adjustable spinner chutes are available with dumpover and tilt up options
  • Pre-wet and De-Icing systems are available
See Specs & Brochure

Under Tailgate Spreader

Henke’s UTS-9 is the ultimate choice for easy maintenance and superior performance.

  • Unique, multi-position cover/backplate allows for better access.
  • Cover/backplate has four positions: Closed to allow material over the spreader, Up to set at 90 degrees, Back to set over 90 degrees to allow the additional tailgate swing, Straight down to allow for improved clean-out access
  • Set-back position for increased material capacity
  • Safety design features include a lock-out device and exclusive side mounting plates
  • Sloped rear apron helps shed material from the dump body into the conveyor trough and helps prevent material build-up
  • Clean-out door swings outward like a tailgate, which also allows the spinner to stay attached to the underside of the spreader, reducing weight for ease of opening and easier access
  • Capable of discharging up to 3/4″ aggregate for road shoulder berming
  • Offset motor mount makes maintenance easy while helping to prevent downtime
See Specs & Brochure