Street Sweepers

Eddynet

Since 1996, Eddynet is specialized in the design and manufacture of hydraulic and mechanical sweepers that can be installed on various equipment, so to be used for cleaning of streets, parking lots, warehouses, etc. The priority of Eddynet is to continually improve the versatility and breadth of its product range, as well as ease of maintenance.

RBRG-07 / RBRG-08 Hydraulic Tow Behind Sweeper

Features

  • 16 gage hood which cover 180° of the brush
  • 32"Ø brush in polypropylene or polypropylene and steel
  • Brush width: 7', 8'
  • The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft
  • Swing arm device allows the brush to work in conjunction with the road oscillations
  • Brush is adjustable by two springs
  • Brush is supported by two ball bearings
  • Anchor and lifting ring
  • Dirt deflector with a sliding adjustment
  • 30° right / left hydraulic angle
  • Two 16.5-6.5-8 front caster wheels

RBRD-07, -08, -09, -10, -12 Hydraulic Tow Behind Sweeper

Features

  • 16 gage hood which cover 180° of the brush
  • 32"Ø brush in polypropylene or polypropylene and steel
  • Brush width: 7', 8', 9', 10' 12'
  • The brush is driven by single (7', 8') or dual (9', 10',12') hydraulic motor coupled directly to the core by a splined shaft
  • Swing arm device allows the brush to work in conjunction with the road oscillations
  • Brush is adjustable by two springs
  • Brush is supported by two ball bearings
  • Anchor and lifting ring
  • Dirt deflector with a sliding adjustment
  • 30° right / left hydraulic angle
  • Two 16.5-6.5-8 front caster wheels

RPHB32-08-02 / RPHB32-09-02 Hydraulic Pick-up Sweeper for Loader

Standard Features

Brush Drive

  • Requires 22 GPM at 2000 PSI for a recommended brush speed of 150 RPM
  • Brush speed is controlled by the equipment engine speed
  • Powered by dual hydraulic orbital motor(s) mounted to the core of the brush
  • Third valve is required to operate the brush and bucket
  • Hydraulic hoses that supply the third valve of the equipment must be 3/4" (19 mm) inside diameter
  • Weight 2030 kgs. (4470Lbs.)
  • Brush

  • 10" (254 mm) outside diameter brush core
  • 32" (813 mm) diameter refillable convoluted wafers
  • Choice of poly, wire or poly / wire bristles
  • Hydraulic bucket & Hopper

  • 2" Diameter Hydraulic cylinder (2)
  • Hopper is dumped (open) using third valve and push valve
  • Close the hopper when you pull the third valve, the brush turn and the bucket close same time
  • Top rubber device between the hopper and the brush to avoid debris from being swept over the hopper
  • Hopper capacity: 0.8 cubic yards
  • Debris Collection

  • Dust, dirt, debris and other materials are sweep directly in the reverse bucket for better collecting efficiency
  • Sweeprite

    We are your source for simple, efficient and cost-effective street sweeping equipment and pothole patchers. We have been building industrial and farm equipment for more than 40 years. Now we use that experience and our philosophy of simplicity and efficiency to bring you a brand new concept in pothole patching, and proven technology in street sweeping.

    S2 Street Sweeper

    Merit Sweeprite sweeping technology gives you excellent sweeping performance in a wide range of applications and conditions. Our system means more debris from the surface goes into the hopper.
    Get the best in performance, reliability and operator comfort for your dollar with the S2 street sweeper.

    Download Brochure

    S3 Street Sweeper

    The most powerful sweeping system in the industry! The S3 takes on millings, trash, sand, gravel, dirt, leaves, bottles and paper. Even grindings left behind by milling operations are no problem for the S3. That’s because the S3 has four dedicated hydraulic pumps – one for each of the gutter brooms, the main broom and the elevator.

    Download Brochure