Milling Attachments

Road Hog

The key to the RoadHog line is that the milling attachments are completely self-contained with their own engine, which eliminates any power requirements from the loader. The RoadHog is available for wheel loaders, backhoes and skidsteers, in horsepower ranges of 50 to 200hp.

Road Saw

The perfect attachment for cutting pavement prior to laying utilities, such as water, sewer and electrical lines as well as traffic sensors and pavement patchwork.

Wheel Loader

  • Designed to cut asphalt, concrete, utility trenches and reclaim or stabilize pavement and base
  • Pavement is recycled in place and can be reused for base reconstruction or trench backfill
  • Units are self contained and require no hydraulic or electrical power from the loader
  • Available with John Deere or Caterpillar Tier 3 turbocharged diesel engines
  • Hydraulic clutch transfers power to a double reduction planetary gear driveline within the drum
  • Master control panel activates engine functions and cutting depth, tilt ( slope ) and sideshift adjustments
  • Drum sideshift allows shoulder milling and reduces loader repositioning within the traffic lane
  • Drum tilt ( slope ) control for matching grades and making bevel or header cuts
  • Drum cutting depth of 0 to 12 inches on wheel loader models, 0 to 8 inches on loader backhoe models
  • Water spraybar with nozzles ( complete 40 or 80 gallon pressurized water system is available as an option )
  • Adjustable waste gate controls the size of discharged material ( optional on RH3075 and RH4075 )
  • Removable front plate allows stabilizing material to be placed in front of the drum during mixing operations

Backhoe

  • Cat ( 78hp ) or Deere ( 80hp ) Tier 3 turbocharged diesel engine
  • Hydraulic clutch transfers power to a double reduction planetary gear driveline within the drum
  • Master control panel activates engine functions and cutting depth, tilt ( slope ) and sideshift adjustments
  • Includes display of engine rpm, oil pressure, water temperature, volts, fuel consumption, hour meter
  • Drum sideshift allows shoulder milling and reduces loader repositioning within the traffic lane
  • Drum tilt ( slope ) control for matching grades and making bevel or header cuts
  • Drum cutting depth of 0 to 8 inches on loader backhoe models
  • Water spraybar with nozzles ( complete 40 gallon pressurized water system is available as an option )
  • Designed to cut asphalt and concrete, utility trenches and reclaim or stabilize pavement and base
  • Pavement is recycled in place and can be used for base reconstruction or trench backfill
  • Units are self contained and require no hydraulic or electrical power from the loader
  • Models up to 72 inches of cutting width with engines up to 200hp are available for wheel loaders

Skidsteer

  • Compatible with any skidsteer with an SAE lift rating of 2,000lbs. ( RH4060 requires and SAE rating above 2,200lbs )
  • Deutz air cooled diesel engine with a belt drive to a planetary reduction hub
  • Wireless remote control of engine functions, as well hydraulic tilt, depth and sideshift control
  • Engine monitoring system with hour meter alerts low battery charge, low oil pressure and high temperature
  • 5 gallon fuel tank on 18” models; 7 gallon fuel tank on 24” models; 8 gallon fuel tanks on 40” models.
  • Dual depth cylinders and side depth skis with fold out edge of cut indicator

Optional Equipment:

  • 25 gallon pressurized ( on board ) or 40 gallon gravity feed ( ROPS mount ) water system
  • Cutting drums in widths from 2.5 inches to 36 inches

Cold Flow Planers:

Standard Cold Flow Planers

This is a low cost alternative for owners of skid steers equipped without the high flow option.

High Flow Cold Planer

Several models of the High Flow Cold Planer from RoadHog are available, with 12" to 40" cutting drums and cutting depths to 8".

These are powered by the skid steers high flow hydraulic system.

Plug Hug:

Plug Hug Fire Hydrant Cleaning System

The Plug Hug is the amazing new way to make fire hydrants “Paint Ready” in 2 minutes and to clear snow covered and plowed under fire hydrants in 60 seconds. The patented design is easy to use as an attachment with the common skid steer, mini loader, excavator or backhoe. The low cost and high rate of production makes The Plug Hug a very beneficial asset for your operations and community year round.

Specifications:

  • Max PSI 3000
  • Torque: 1,040 ft/lbs.
  • Max Torque < 4000 ft/lbs.
  • Speed & flow: 38 RPM @ 8 GPM
  • Drive shafts: 2” Hex or 2 9/16” Round
  • Skid Steer, Backhoe, Excavator, Mini Loader
  • Min. machine GVWT 6,500 lbs.
  • Hydraulic Motor Support Bracket Required