Distributors

Etnyre

E.D. Etnyre & Co. proudly manufactures a wide range of equipment that serves the asphalt road building industry, from asphalt distributors to chip spreaders and storage tanks to trailers.

They build every unit to order and provide unparalleled support, from product selection to parts and service. If you're looking for the best in distributors and chip spreaders...Etnyre has you covered!

Chip Spreaders

Etnyre ChipSpreaders are designed to accurately and efficiently apply a controlled amount of aggregate to the road in the chip seal process. Etnyre ChipSpreaders achieve these results using a hydrostatic drive system and a variable width spread hopper to apply multiple aggregate sizes and application rates thru a full range of travel speeds and spreading widths.

Download Borchure Download Series Booklet

Asphalt Distributors

Set the bar on asphalt application accuracy and quality with our Black-Topper® Centennial asphalt distributors. The units’ streamlined design minimizes maintenance while enhancing performance and productivity. Like all Etnyre equipment, we build every unit to order so you get the features and output you need to be successful.

Download Borchure Download Features

Hi Way

Hi-Way is a leading manufacturer of winter maintenance equipment including salt and sand spreaders, snowplows and multi-purpose dump bodies. Since 1939, Hi-Way has been the leader in winter road maintenance equipment. Heavy gauge steel, durable components and easy-to-use design are built into everything we produce.

If you're looking for the best in de-icing and snow removal equipment...Hi-Way has it!

Tailgate Spreaders:

SA 6C

The SA-6C tailgate spreader features a 6" (15.2cm) bi-directional auger for centerline deicing or windrowing. The bi-directional flighting ensures material feeds evenly from both sides of the dump body to the left-hand discharge area. An easy-open hinged bottom panel allows for one-person trough clean out and quick-disconnect hardware enables easy removal or installation.

The SA-6C comes standard with a heavy-duty 7-guage cover/back plate and trough with 1/" endplates; an 18" polyurethane spinner disc with six fines and a direct drive hydraulic motor. Optional equipment includes in-cab control for auger and spinner plus master on/off controls, a 5:1 worm gear drive and non-painted corrosion resistant 304 stainless steel construction.

Download Spec Sheet

SA 9

The SA-9 tailgate spreader is designed for winter deicing and year-round road maintenance. The auger conveys material to the left of the truck for centerline deicing and windrowing or to the right of the truck to berm roadsides and fill trenches with the material chute. Featuring a heavy-duty 7-gauge cover/back plate and a trough with 1/4" (6.44 mm) endplates, the SA-9 comes standard with a an 18" (46 cm) polyurethane spinner disc with six formed fins to protect the hydraulic motor from material impact and provides a superior spread pattern.

Optional equipment for the SA-9 include: a 5:1 worm gear drive and non-painted corrosion resistant 304 stainless steel.

Download Spec Sheet

TGC18

The TGC-18 reversible tailgate conveyor discharges material to the right- or left-hand side for repairing edge ruts, filling trenches, and restoring road shoulders. Quick disconnect pins permit removal and attachment without the use of tools. Featuring heavy-duty 7-gauge trough, bottom and endgates, the TGC-18 comes standard with an 18" wide belt-over-chain conveyor, riveted to 1/4" x 1" (6.14 mm x 25mm) cross bars for either right- or left-hand discharge. The belt is heat and oil resistant with a wide temperature range for coarse material.

Optional features of the TGC-18 include a spinner assembly for the spreading deicing materials; a 2' discharge chute for edge rut work and non-high-temp belt-over-chain in lieu of high-temp conveyor.

Download Spec Sheet

Do-Al

The Hi-Way® Do-Al may be used year-round for road maintenance and deicing with the ability to spread virtually any dry material. A manually operated swinging rear endgate allows for controlled material flow or high-speed, no-hoist dumping. The Do-Al also features a heavy-duty 7-gauge hopper, a high-torque/high-speed selector valve, in-cab manual control valve with independent control of conveyor and spinner, built-in relief valve, and 20-gallon (75.7 liters) reservoir with filter and indicator with all hoses and fittings.

Optional equipment for the Do-Al includes a 24" wide self-storing discharge elevator that includes a variable speed control, hydraulic winch, hose and fittings, and a #4 belt-over-chain conveyor or a #4 high-temp belt-over-chain conveyor with a wide temperature range for handling hot asphalt mix and/or petroleum based products. Cab shield, inverted "V", and screens are just some of the other option available.

Download Spec Sheet

Dump Bodies:

PS350

Designed for a single-axle chassis and available with an underbody hoist or a front mount telescopic hoist contained within a doghouse, the PS350 features heavy-duty 10-gauge grade 50 sides, headsheet and tailgate as well as a 7-gauge "one piece" grade 50 floor with no cross members, resulting in a lighter-weight body.

Standard features of the PS350 include seamless and outward sloped top rail, rub rail and horizontal braces; a 5" formed floor to side radius prevents material build-up in corners and 10-gauge grade 50 front and rear corner posts, with front corner posted tapered for added body strength.

Optional features for the PS350 include 304 stainless steel, cab shield, ladder and asphalt lip. A coal chute door, 6 panel tailgate bracing and tarp rail are just some of the other optional features available.

Download Spec Sheet

PS400

Designed for a tandem-axle chassis, the PS400 features heavy-duty 10-gauge grade 50 sides, headsheet and tailgate as well as a 3/16" (4.88mm) AR 400 "one piece" floor with no cross members, resulting in a lighter-weight body.

Standard features of the PS400 include seamless and outward sloped top rail, rub rail and horizontal braces; a 5" formed floor-to-side radius to prevent material build-up in corners; and 7-gauge grade 50 front and rear corner posts for added body strength.

Optional features for the PS400 include 304 stainless steel construction, cab shield, and asphalt lip. A coal chute door, 9 or 12 panel tailgate bracing and tarp rail are just some of the other optional features available.

Download Spec Sheet

T6034

The T6034 Asphalt Transporter conveys more than 23 cubic yards of asphalt per minute, all from the convenience of the cab. The endgate is hydraulically controlled and provides a large 1,170 square inch opening. This unique "power door" ensures a smooth flow of materials, unlike typical live bottom machines that tend to push the materials through a gravity-held endgate and restrict flow. The conveyor speed is also controlled from within the cab allowing other workers to remain a safe distance away from hot asphalt and moving parts.

An optional internal metering gate delivers low rates of asphalt or aggregate for patch work and shoulder work. This internal gate easily latches for metering by engaging two pins. When disengaged, the internal gate fully opens along with the external rear endgate for unrestricted flow of material. The T6034 also features heavy-duty construction, a durable conveyor system and is easy to maintenance and service.

Download Spec Sheet